E3D SuperVolcano Starter Pack – 1.75mm – (12v)

$109.99

The fastest hotend I know of for desktop FDM 3D printing.  This is really only meant for a large printer since the nozzle sizes go from 0.6mm – 1.4mm in diameter.

I have a review of this and the standard Volcano here, where you can see just how fast this can extrude: https://www.youtube.com/watch?v=h0LxiKVpQHQ

Description

YOUR ONE AND DONE UPGRADE PACK TO SUPERVOLCANO

This Starter pack includes everything you need to convert an existing v6 or Titan Aero hotend to SuperVolcano with a 1mm nozzle. Replace the standard heater block with the included SuperVolcano block, 80w heater cartridge and extra long nozzle for the ultimate in fast, strong 3D printing hardware. With variable nozzle sizes available from 0.6mm all the way up to 1.4mm the SuperVolcano is applicable in a wide variety of applications where ultra wide or high speed are important factors. With the standard Plated Copper heater block, the SuperVolcano welcomes temperatures upwards of 400°C with an upgraded temperature sensor.

WHAT’S IN THE BOX?

  • SuperVolcano Plated Copper Heater Block
  • Silicone glass fiber insulating sock
  • Thermistor with extension cable
  • 12v 80w Heater Cartridge
  • Thermal Paste
  • 4x M3 grub screws
  • Hex Key
  • Mosfet board
  • Mosfet wiring kit
  • 1.75mm x 1.0mm Brass Nozzle

Due to the current of the 12v electronics, the Mosfet board is required to run the heater cartridge at this voltage!