TH3D EZABL Auto Bed Leveling

$59.99

TH3D EZABL Kit is a great way to turn your printer, including CR-10, into having an auto-bed leveler.  Reviewed in this video: https://www.youtube.com/watch?v=sJdMfjJWZ7g

Easily Add Auto Bed Leveling to your 3D Printer! NO soldering at all!

  • Includes the TH3D EZABL Sensor pre-wired to our EZABL V3 Board and wire for power
  • Works on Glass, Mirror, Aluminum, Buildtak, Acrylic, and more
    • If you have an AC bed please see notes below about using it with the EZABL
  • Full Installation Documentation Included
  • Pre-setup Firmware Included FREE to get you going quick
    • All sensor mounts are included with the firmware download for supported printers
  • FREE Email Support Included with Kit
  • 100% Original Kit Developed and Assembled in the USA by TH3D (We build every kit by hand)
  • Tech Specs:
    • Onboard Power Filtering & Decoupling
    • High Speed Toshiba Optocoupler IC
    • Reverse Voltage Protection
    • High quality 2oz Copper, 2 Layer PCB w/ Full Ground Plane
    • TH3D 100hz 18mm Capacitive Sensor
      • Weighs only 40 grams

The EZABL Kit is a fully original design that makes adding an Auto Bed Leveling Sensor to your printer much easier than DIY solutions.

***This version requires hooking up the included power wire to your 12V or 24V printer power supply. If you are not comfortable running wire or it’s difficult to get access to your printer power supply then look a the EZ-Connect version which has it’s own power adapter.***

You will receive a full kit that includes:

  • TH3D EZABL Sensor pre-wired to our EZABL V3 Board and wire for power
  • Works on Glass, Mirror, Aluminum, Buildtak, Acrylic, and more
    • If you have an AC bed please see notes below about using it with the EZABL
  • Full Installation Documentation Included
  • Pre-setup Firmware Included FREE to get you going quick
    • All sensor mounts are included with the firmware download for supported printers
  • FREE Email Support Included with Kit
  • 100% Original Kit Developed and Assembled in the USA by TH3D (We build every kit by hand)
  • Tech Specs:
    • Onboard Power Filtering & Decoupling
    • High Speed Toshiba Optocoupler IC
    • Reverse Voltage Protection
    • High quality 2oz Copper, 2 Layer PCB w/ Full Ground Plane
    • TH3D 100hz 18mm Capacitive Sensor
      • Weighs only 40 grams
  • Works with ANY printer that runs Marlin and our support can help you get it running and setup. If you are unsure about what your printer runs please Contact Us.
  • Some printers require a bootloader that needs an Uno to be flashed. Please check the Unified Firmware page to see if yours needs one (CR-10, Wanhao i3, Ender 2, Ender 3)

There is also FREE email support included to help you get going and printing with a leveled bed.

Extensive firmware setup assistance – phone, messenger, or video chat – is available but there may be a charge for this due to the involvement required or what the issue is. This does not apply if you are using a pre-supported printer listed above. Meaning if you want to add ABL and aren’t familiar with your board/printer firmware we can assist you with this.

AC Bed Notes:

If you have an AC bed the frequency of the AC current can throw off the accuracy of the sensor. This can be avoided by simply turning off the AC bed when Z homes and G29 runs. Once those are completed you can turn the bed back on. If you use a SSR to control the AC bed (like what the Tevo Tornado has from the factory) the firmware will automatically manage this for you. If you are doing your own DIY SSR+AC Bed setup we highly recommend the MSSSR20 SSR from Misumi as it has very low AC leakage current. Some low quality SSRs will leak a small amount of AC current and can affect the sensor even when in the off state. There is a guide on our knowledgebase about using a wifi outlet + raspberry pi to manage a standalone heater.

If you have any inquiries feel free to Contact Us!

90 Day Warranty Against Defects – Physical or Electrical Damage due to improper installation or use is not covered. Items are all pre-tested before leaving the shop.

By purchasing this item and any item in this shop you agree to the Terms of Service.

Current EZABL Board version: V3 (as of 3/6/2018).