TOUGH 3D INK 250FT

$20.00

I used this filament in my flexible filament comparison video: https://www.youtube.com/watch?v=MXoiqWxPuwM

Tough 3D Ink® is a proprietary non-toxic thermoplastic blend made exclusively by M3D. Tough offers unprecedented utility for 3D printing due to its strength and controlled amount of flexibility. When compared to traditional filaments which have a fraction of the bond strength and are typically brittle when printed, Tough 3D Ink is bonded at full strength, allowing you to print longer-lasting objects. Tough is great for medium and large models that need to hold up in the real world or need lots of give.

Tough is M3D’s most popular filament material to date! It tends to sell out very quickly, so be sure to buy now to reserve your favorite colors.

Description

Technical Specifications:

Filament Length: 250ft / 76.2m (why do we sell by length?)
Filament Diameter: 1.75mm (not chipped, can be used with almost all 3D printers). The 3-letter code printed on the spool will automatically set the correct extrusion temperature in the M3D software for the Micro, Micro+, and the Pro.
Shore Hardness: 90A
Material Density (ISO 1183): 1.19g/cm3
Recommended Extrusion Temperature: 220 – 240°C
Recommended Heated Print Bed Temperature: 45 – 60°C when used, but it is not required
Recommended Build Surfaces: M3D printbed sheet, painter’s tape, glue stick, glass plate, PEI
Other Printer Requirements: Part cooling fan